Mirror Finish Detail

876 Burwood Hwy,
Ferntree Gully VIC 3156

Mon - Fri 9am - 6pm,
Sat 10am - 4pm

03 9088 7534
Call us anytime

We are the Gulf Coast’s only Authorized Installer of Opti-Coat Pro from Optimum Polymer Technologies!

What is Opti-Coat Pro?
Opti-Coat Pro is the strongest protection available for a vehicle’s clear coat. Opti-Coat is a hard wearing, aftermarket, ceramic clear coat for superior resistance to scratching (9H) and chemical etching from environmental impacts. It provides permanent protection for all factory paints, and can also be applied to exterior glass, metal and hard plastic surfaces.

Opti-Coat is not a wax or sealant like other products on the market. It is a ceramic clear coating very similar to factory type clear coats. A layer of Opti-Coat measures approx. 2 microns in thickness, or about 100 times thicker than your typical wax or sealant. Unlike paint protection sealants such as PTFE, Nano Sealants, GlassPlexin that degrade over time and are easily removed through washing with water or chemicals, Opti-Coat does not degrade and cannot be removed by chemicals such as heavy duty truck wash or even caustic degreasers. It is totally resistant to these chemicals and produces a permanent film that is chemically bonded with the factory paint layers. Opti-Coat is effectively the vehicles new outer clear coat. It is far more resistant to chemical etching than factory clear coats and far more resistant than competing paint protection sealants. The 2 micron layer also provides a thick buffer between any damage and the factory paintwork. Opti-Coat Pro can only be removed by mechanical abrasion, i.e. compounding, polishing or sanding.

The Warranty
Opti-Coat Pro is applied once, and lasts for the entire lifespan of the paint. It comes with a lifetime warranty for new vehicles (application within 12 months of purchase), and a 5 year warranty for vehicles 1-5 years old. Warranty details can be found here.

Getting Opti-Coat Pro Installed
Opti-Coat Pro needs a completely clean surface to bond to. This means a full paint decontamination is needed to remove waxes, oils, silicones and bonded contaminants such as rail dust and overspray. As mentioned, Opti-Coat Pro is a permanent coating. This means that the paint should be in the best visual condition prior to installation. Any scratches, swirls or other imperfections will be trapped unless the coating is mechanically removed.

Therefore, a full paint decontamination and at least one polishing step is required before installation. This is included in The Rejuvenator and Exterior Rejuvenator packages. Basic prep (wash and paint decontamination) can be done separately as well for $95

Our prices for Warrantied Opti-Coat Pro installation are as follows:

$495 for small vehicles (Compact, mid and full-size sedans, convertibles)

$545 for medium (full size wagons, crossovers, compact SUVs, compact trucks)

$595 for large (Vans, full-size trucks, full-size SUVs)

Opti-Coat Pro can also be applied to the entire wheel surface including the inner barrels. Wheels-off installs are $95

About Author

Admin

0 Comments

Leave a Reply


Facebook Feed

Copyright © Mirror Finish Detail 2015 - 2019